IEC Power Cable Sleeve Installation Guide

Download a PDF copy

IEC power cable sleeves help secure the power cable to the connected device.

Note: Power sleeves are unnecessary if the device includes a wire-locking mechanism, like a C21 power cable with a WattBox 20A IP-enabled Power Conditioner.

To install an IEC power cable sleeve:

  1. Insert the power cable in the device's AC inlet and note the depth required to fully seat the power cable.

  1. Slide the power sleeve over the female end of the IEC power cable with the tabs facing away from the IEC end.

  2. Ensure the sleeve is fully seated and secure over the IEC end.

  3. Carefully apply pressure while inserting the power cable to avoid damaging the device.