WattBox

The Details page shows the outlet name, power draw, and provides outlet control to power an outlet on/off or reset it, as well as the Device Details window preset on all OvrC-enabled devices.

Note: If an outlet is set to Disabled you cannot control it. If an outlet is set to Reset Only it can only be reset.

If an OvrC-enabled UPS is connected to the PDU, the estimated run time, load, and battery condition are displayed.

Click here to download a comprehensive WattBox Guide, that includes installation best practices and load calculation worksheets.

OLUPS-UPS Series

UPS-specific details are at the bottom of the Details tab of the WattBox IP power conditioner the UPS is connected to. This information includes the UPS Age, the Battery Age, the amount of Time on Battery, and how many times the UPS has lost AC Connection.

Click the Replace Battery button to reset the battery information after swapping the battery.

Note: The UPS must be connected to the UPS link on an 800 or 820 series WattBox PDU to see these details.

Extended Battery Packs lists the battery packs connected to the UPS, their Age (amount of time connected) and the Install Date.

Click the kebab menu to Edit the Device Name and Install Date, or click Replace when installing a new Extended Battery Pack.