MoIP configuration for Araknis 210/310 Series Switches

Note: Enable these settings on every managed switch on the network, unless a step specifically states it is for a core MoIP switch.

  1. Navigate to Advanced > IGMP Snooping. 

  1. For Status, click Enabled. 

  1. Verify the Version is set to V2. 

  1. Set the Unregistered Multicast Behavior to Drop. 

Table Description automatically generated 

  1. Under VLAN settings, enable IGMP Snooping Status on the VLAN ID the MoIP devices are configured on and verify Fast Leave is Disabled. 

 

  1. On core MoIP switches, set the Querier State to Enabled. Verify the Querier Version is v2. 

Caution: The core MoIP switch must have the lowest IP address among any switches with the querier state enabled or participating in querier election participation.

Graphical user interface Description automatically generated with medium confidence

Note: In Araknis x10 switch firmware v1.3.10 and earlier, IGMP Querier auto-election is currently unavailable. Set all edge switches to Querier Disabled to avoid issues.
A firmware update is in development to resolve this issue.

  1. Under Router Settings, at the bottom of the page, set the Router Ports Auto-Learned to Enabled on all VLANs.