Configuring MoIP Audio Receivers in OvrC

The Maximum Output Level can be set to 1 or 2 Volts RMS (Vrms). Verify the maximum voltage level of the line level input of the connected amplifier, switcher, or preamp before configuring this setting. If the connected device is only capable of outputting 1 Vrms, set the Maximum Output Level to 1 Vrms for the best system performance.

The Output Volume is adjustable for use with an amplifier without an adjustable volume level. If the connected device has its own volume control, leave this setting at 100%.

MoIP audio receivers provide up to 250 milliseconds of Audio Latency adjustment. If the audio needs to be delayed in a specific location, make the adjustment on the receiver. If the delay needs to be configured globally, configure it on the transmitter.

Click Save, at the bottom of the page to apply settings.