API overview

Use the following information when using IP commands to control the Episode™ ESA-70V2CH-150W/300W/500W Amplifiers.

Note: -__.Read the entire document before using any IP commands.

Advanced knowledge of control system programming is required. Please contact the control system manufacturer for questions on setting up IP commands.

For more information about ESA-70V-2CH-IP amplifiers, visit our website and view the product page for the amplifier, orcontact Snap One Tech Support.

Before you begin

Make sure the following items are close at hand for setup:

ESA-70V2CH-150W/300W/500W Amplifier on firmware version 01.00.78.370 or higher
Control system with IP control
Control system documentation
ESA-70V2CH-150W/300W/500W Installation Manual

List of the functions to program into the control system

Copyright © 2024, Snap One, LLC. All rights reserved. Snap One and its respective logos are registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained herein covers all installation scenarios and contingencies, or product use risks. Information within this specification subject to change without notice.