EA-WAKE-2D
WAKE Amp Installation Guide
Thank you for purchasing Episode® Electronics. To complete installation, follow these guidelines. Visit our website for design recommendations and speaker calculators.
Package Contents
-
1× WAKE Amp
-
2× Junction box screws
-
1× Face plate
-
2× Faceplate screws
-
1× Power supply
-
1× Power supply adapter
Selecting Wire
-
The WAKE Amp can accommodate 14 to 22 gauge speaker wire. The longer your run, the thicker the wire should be.
-
All in-wall and in-ceiling wire installations are subject to local code fire ratings. Never use lamp or zip cord for an installation where the wire will be in a wall or ceiling.
-
Always use multi-strand copper speaker wire for your installations.
-
UV-protected wire should be used for outdoor installations.
-
Check your local building and fire rating codes for low voltage device installation & wiring requirements before you begin your installation.
-
In existing construction installations, check for obstructions such as any pipes, conduit or wiring before cutting into drywall.
Selecting a Junction Box
The WAKE Amp is compatible with backless single-gang plastic back boxes, with a depth of 3.25".
Caution: -.Do not use a metal back box as it significantly impacts Bluetooth performance and range.