Connecting to OvrC

1. Connect the amplifier to the local network. There must be internet access.

2. Create a new account at www.OvrC.com, or log in to an existing account.

3. Select an existing Customer, or create a new one.

4. If there's an OvrC Pro Hub on-site, click the Scan button. If there is not an OvrC Pro Hub, click Add Device and enter the amplifier’s MAC address and serial number.

5. In the Device list, click on the Hybrid amplifier's name, then go to the Configure tab to continue setup.

Visit snp1.co/ovrc-ug to learn more about OvrC.

Connecting to the web interface

If the amp is claimed in OvrC, use the WebConnect feature to access the web interface. This feature can be used locally or remote.

To access the web interface without OvrC, enter the IP address into a web browser. The IP address is displayed on the front panel after powering the amplifier on.

The Hybrid amplifier’s default IP address is 192.168.100.118, if you do not connect it to the LAN.

The default login credentials are:

• Username: episode

• Password: episode